ANZANI ENGINE PARTS

For further information please read our notes on Anzani Engines.

CRANKCASE

DescriptionNotes.Price
Machining magneto platform to correct height. 39.00
Strengthen & m/c magneto platform See note (3)58.00
Drilling, tapping & spotfacing of crankcases & sumpSee note (4)92.00
Crankcase studs, BSF or UNF thread.See note (5) 64.77
Crankcase nutsSee note (5) 5..42

CYLINDER BLOCKS & ASSOCIATED PARTS

DescriptionReference.Price
Machine excess metal from inlet , exhaust & water passages. Also correction of misalignment of camfollower mounting.  448.5
Hand fettling and polishing after machining. 190.00
Resin impregnation of cylinder block.See note (1)48.90
Suitable pistons including necessary modifications.set286.78
Boring of block to suit pistonsSee note (1) 79.80
Head to block transfer plates. Gunmetal.  30.63
Modifications to above to increase flow to rear cylinder. 20.00
Modifications to head & block to increase water flow.  62.00
Water elbow. 33.60
Tappet cover plate.  13.86
Capstan nuts. BSF or UNF thread.See note (5)7.58
Cylinder block studs. BSF thread.See note (5)67.27
Collar nuts, block to crankcase. Set.See note (5) 75.88
Cylinder head nuts,BSF or UNF.See note (5) 17.07

CAM & VALVE GEAR

DescriptionNotes.Price
Camshaft blank. 168.70
Camchafts. New, to H.E plus timing. Including oil pump gear See note (2) 624.00
Camshaft followers. Each74.53
Cam follower roller. Each £7.50
Cam follower pin. Each £0.75
Tappet retainer. Each £16.84
Valves, springs collars & collets. Valve set. 42.72
Valve guide. Each £4.38

TIMING COVER AREA

DescriptionNotes.Price
Front timing cover. Casting only. 356.00
Machining of timing cover casting. 184.00
Timing cover studs inc. swing bolt.See note (5)11.86
Oil filler cap. 10.38
Breather , complete. 44.50
Timing sprockets (roller chain) including magneto.  224.73
Timing chains.  36.62
Timing chain tensioner.   £74.30
Magneto drive shaft.  129.78
Magneto drive shaft bearing. White metal.   £268.12
Simms magneto drive complete. 52.80
Bronze dynamo drive gear. 72.96
Starting handle dog/crankshaft nut. 28.60
Starting handle shaft. 31.30

SUMP AREA

DescriptionNotes.Price
Extension for spigot bearing.Phoenix crankshaft. 36.80
Oil pump drive shaft. 41.65
Oil filter & mount, full flow.  40.80
Oil pump. (N.B. No oil pressure relief valve fitted. See below.).  444.55
Oil pressure relief valve. (To be fitted in sump.). 24.00
Oil delivery pipework, including to full flow oil filter. 74.00
Rear engine bearer. Casting only. 134.00
M/C Engine bearer inc. starter spacer.See note (6)96.00
Sump drain cover. 12.04
Sump dipstick & location sleeve. 16.80
Complete assembly of new Anzani engine following supply of the crankcase, sump, block, crankshaft & conrods, including all new parts as above, willingly undertaken.See notes (7&8) 6765.00

ANY OTHER PARTS REQUIRED CAN BE QUOTED FOR INDIVIDUALLY OR AS A BATCH.

Prices subject to revision. This list dated 1/07/2013


ALL PRICES ARE EXCLUSIVE OF VAT. TRADE & EXPORT ARRANGEMENTS AVAILABLE.

 
Address:
The Barn, Leygreen Farm, Lyndhurst Road, Beaulieu, Hampshire, SO42 7YP
Phone / Fax: 01590 612181