ALL PRICES SUBJECT TO VAT AT PREVAILING RATE. TRADE AND EXPORT ARRANGEMENTS AVAILABLE
CRANKCASE
Description Notes. Price Machining magneto platform to correct height. £154.00 Strengthen & m/c magneto platform See note (3) £186.00 Drilling, tapping & spotfacing of crankcases & sump See note (4) £342.00 Crankcase studs, BSF or UNF thread. See note (5) £117.67 Crankcase nuts See note (5) £7.78
CYLINDER BLOCKS & ASSOCIATED PARTS
Description Reference Price Machine excess metal from inlet , exhaust & water passages. Also correction of misalignment of camfollower mounting. £948.5 Hand fettling and polishing after machining. £435.00 Resin impregnation of cylinder block. See note (1) £128.90 Suitable pistons including necessary modifications. £538.78 Boring of block to suit pistons See note (1) £248.80 Head to block transfer plates. Gunmetal. £70.63 Modifications to above to increase flow to rear cylinder. £65.00 Modifications to head & block to increase water flow. £192.00 Water elbow. £53.60 Tappet cover plate. £33.86 Capstan nuts. BSF or UNF thread. See note (5) £27.58 Cylinder block studs. BSF thread. See note (5) £122.84 Collar nuts, block to crankcase. Set. See note (5) £108.92 Cylinder head nuts,BSF or UNF. See note (5) £17.07
CAM & VALVE GEAR
Description Notes Price Camshaft blank. £168.70 Camchafts. New, to H.E plus timing. Including oil pump gear See note (2) £954.00 Camshaft followers. Each £183.15 Cam follower roller. Each £34.77 Cam follower pin. Each £3.02 Tappet retainer. Each £16.84 Valve, spring collar & collets. Valve set. £49.69 Valve guide. Each £17.46
TIMING COVER AREA
Description Notes Price Front timing cover. Casting only. £356.00 Machining of timing cover casting. £184.00 Timing cover studs inc. swing bolt. See note (5) £14.86 Oil filler cap. £10.38 Breather , complete. £44.50 Timing sprockets (roller chain) including magneto. £297.34 Timing chains. £116.76 Timing chain tensioner. £113.33 Magneto drive shaft. £229.78 Magneto drive shaft bearing. White metal. £368.12 Simms magneto drive complete. From £98.26 Bronze dynamo drive gear. £172.96 Starting handle dog/crankshaft nut. £128.60 Starting handle shaft. £131.30
SUMP AREA
Description Notes .Price Extension for spigot bearing.Phoenix crankshaft. £136.80 Oil pump drive shaft. £71.65 Oil filter & mount, full flow. £100.80 Oil pump. (N.B. No oil pressure relief valve fitted. See below.). £634.55 Oil pressure relief valve. (To be fitted in sump.). £44.00 Oil delivery pipework, including to full flow oil filter. £134.00 Rear engine bearer. Casting only. £334.00 M/C Engine bearer inc. starter spacer. See note (6) £196.00 Sump drain cover. £42.04 Sump dipstick & location sleeve. £46.80 Complete assembly of new Anzani engine following supply of the crankcase, sump, block, crankshaft & conrods, including all new parts as above, willingly undertaken. See notes (7&8) £16765.00
Prices subject to revision. This list dated 1/7/2023
ANY OTHER PARTS REQUIRED CAN BE QUOTED FOR INDIVIDUALLY OR AS A BATCH.
ALL PRICES ARE EXCLUSIVE OF VAT. TRADE & EXPORT ARRANGEMENTS AVAILABLE.